Safety Instructions; User Manual - HQ-Power VDPLP703RGB Manual Del Usuario

Mini led par 7 x 3 wrgb
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be returned
to your distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing HQPower™! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, do not install or use it and contact your dealer.
2.

Safety Instructions

Be very careful during the installation: touching live wires can cause life-threatening
electroshocks.
Always disconnect mains power when device not in use or when servicing or maintenance
activities are performed. Handle the power cord by the plug only.
Indoor use only. Keep this device away from rain, moisture, splashing and dripping
liquids. Never put objects filled with liquids on top of or close to the device.
Keep this device away from children and unauthorized users.
Caution: device heats up during use.
Do not stare directly at the light source, as this may cause
epileptic seizure in sensitive people
temporarily loss of sight (flash blindness)
permanent (irreversible) eye damage.
Respect a minimum distance of 0.5 m between the device's light output and any illuminated
surface.
There are no user-serviceable parts inside the device. Refer to an authorized dealer for
service and/or spare parts.
This device falls under protection class I. It is therefore essential that the device be earthed. Have a
qualified person carry out the electric connection.
Make sure that the available voltage does not exceed the voltage stated in the specifications of this
manual.
Do not crimp the power cord and protect it against damage. If the external flexible cable or cord of
this luminaire is damaged, it shall be exclusively replaced by the manufacturer or its service agent or
a similar qualified person in order to avoid hazard.
Use an appropriate safety cable to fix the device (e.g. VDLSC7N or VDLSC8N).
Install the device at a minimal distance of 0.5 m from flammable and explosive objects or
substances.
Respect a minimum distance of 15 cm between the device and the wall.
The maximum ambient temperature is 40° C. Do not operate the device at higher temperatures.
V. 03 – 26/11/2014
VDPLP703RGB

USER MANUAL

3
©Velleman nv
Tabla de contenido
loading

Tabla de contenido