Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MAIN COMPONENTS AND ACCESSORIES ( FIG 1 )
1.
Water filler hole cap
2.
Spray outlet
3.
Spray button
4.
Water tank
5. Removable anti-scale filter
6.
Non-slip legs
7.
LCD display (Fig 2)
a) Temperature change indicator
b) Temperature selected
c) Steam selected
d) Water filling indicator
e) Anti-scale filter icon
f) Automatic Auto-Pause icon
g) Steam On/Off switch
h) Power On/Off (hold 2 seconds to turn iron off)
& temperature selector button.
i) Steam volume selector button & Steam Ready™
feature (hold 5 seconds to activate)
8.
Water jug
BEFORE STARTING TO IRON
•
With your Digital Velocity iron unplugged from the main outlet, open the filler
hole cap Fig 3 (1) by turning it backwards (see arrow).
•
Due to the high level of water hardness in most areas, Reliable recommends
that you always use distilled or demineralized water for ironing. You will
thus guarantee that your iron stays in perfect condition for as long as possible.
If you cannot find distilled water for any reason, be sure to use water that
is low in minerals (soft).
•
The following is a list of the best water for your Velocity iron in order
of preference:
° Distilled water
° Softened water (from a household water softener)
° Filtered water with low mineral content (counter top unit or store bought)
° Tap water (if your tap water is hard, this is the least recommended).
•
Fill the tank, without exceeding the maximum level, with the water jug sup-
plied Fig 1 (8), keeping the iron in the vertical position, resting on the non-slip
rear cover legs Fig 3 (6). When the tank is full, close the cap.
•
We advise you to fill the tank up to the maximum level marked on it as this
appliance generates a substantial flow of steam, otherwise you will need to
fill the water tank more often.
05
Tabla de contenido
