Sears Craftsman 247.77638 Manual Del Operador página 10

.
Thechippershredderwas shippedwith one end of the support
bracealreadysecuredto the lowerframe.Loosenbutdo not
removethebolts securingthe braceto theframe.
Figure7
A. Align the holesin the chute with the holesin the top of the
braceand attachbraceto chipperchutewith hardware
previouslyremoved.The flat washersshouldbe placedunder
the bolt headsand againstthe insidesurfaceof the plastic
chipperchute.Tightensecurely.See Figure7.
B. Tightenthe bolts securingthe supportbraceto the frame.
C. Tightenthe threenuts on the weld studsholdingthe chipper
chute to the impellerhousing.
ATTACHING THE BAG
f
Toattachthe bag:
A. Placetheopeningof the bag completelyoverthechute
deflector.
B. Pullon the drawstringuntilthe bag is tight aroundchute
deflectoropening.
C. Clipdrawstringbackon itself,tight againstchute deflectorto
secureinto position.See Figure8.
Figure8
J
10