AEG BSS 4826 Instrucciones De Servicio página 52

English
52
NOTE:
• Depending on the device manufacturer, you need to perform the registration (PAIR-
ING) again to connect the devices.
• In the case of problems with the pairing of a playback device, deactivate the WiFi-/
and mobile data function in your playback device.
• The Bluetooth compatibility cannot be ensured for devices (e.g. mobile phones) get-
ting released in the future.
• To ensure an optimal connection, make sure that the battery of your player is com-
pletely charged.
• Some of the mobile phone brands have an energy-saving mode. Deactivate the
energy-saving mode as it can otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to stay activated in your player.
Observe the operation manual of your player.
• If a mobile phone on which you are playing music receives a call, the music will be in-
terrupted. Press the
loudspeakers. Speak into the microphone on the device or transfer the conversation
to your mobile phone. To do this, observe the overlay in the display of the mobile
phone. After you have ended the call, the devices are connected to each other again
and playback continues.
Operation
/ On/Off (6)
• Switch the speaker on by pressing the
control light (7) will start to blink.
NOTE: Automatic connection
If supported by your player (e.g. mobile phone), the devices will be connected auto-
matically. The prerequisite for this is:
• The devices were already connected with each other.
• Bluetooth is activated in your player.
• Keep the / button (6) pressed for about 2 seconds to turn off the loudspeakers
again. The units are disconnected.
NOTE:
To save the battery, switch off the speaker when not in use.
/ button (6), to accept the call. The sound is replayed by the
/ button (6) for approx. 3 seconds. The