Peavey XR684F Manual De Operación página 60

XR684F/XR696F · Input Specifications:
Input Z
Function
(ohms) Min
Lo-Z Mic (150 ohms) 2k
Line Input 22k
Tape 20k
0dBU = 0.775V (RMS)
** Minimum input level (sensitivity) is the smallest signal that will produce nominal output (4dBu) with channel and master controls set for
maximum gain.
* Nominal settings are defined as all controls set at 0dB (or 50% rotation for rotary pots)
XR684F/XR696F · Output Specifications:
Function Minimum Load Z (ohms)
Main L/R 600
Monitor 600
Tape 10k
+2dBU = 0dBV = 1V (RMS)
Gain:
Mic Input to Left and Right Output
Line Input to Left and Right Output
Frequency Response:
Mic Input to Left/Right Output
Line Input to Left/Right Output
To Power Amplifier Output
Total Harmonic Distortion:
<0.01% 20Hz–20kHz Mic Input to Left/Right/Mon Output at Nominal Level (20Hz–80kHz BW)
<0.01% 20Hz–20kHz Line Input to Left/Right/Mon Output at Nominal Level (20Hz–80kHz BW)
<0.005% Typical @ 1kHz
Graphic Equalizer:
Filter Bandwidth
Filter Frequencies
Maximum Boost and Cut
XR ® 684F/XR ® 696F · Technical Specifications
Input Gain Control
Settings
Max w/o pad (50dB)
Max w/pad (25dB)
Max w/o pad (30dB)
Max w/pad (5dB)
Max Gain (30dB)
Nominal
+4dBu
+4dBu
+4dBu
Input Levels
Min** Nominal*
-59dBu -29dBu
-34dBu -4dBu
-27dBu +2dBu
-2dBu +27dBu
-26dBu +4dBu
Output Level
Max
+15dBu
+15dBu
+14dBu
60dB (Max Gain)
30dB (Max Gain)
20Hz–20kHz +0dB/-1dB
20Hz–20kHz +0dB/-1dB
20Hz–20kHz +0dB/-1dB
1 Octave
63‚ 125‚ 250‚ 500‚ 1k‚ 2k‚ 4k‚ 8k‚ 16k
+12dB Boost‚ -12dB Cut
60
Bal Connector
Max Unbal
-11dBu Bal XLR Pin 1 Gnd
+14dBu Pin 2 (+)
Pin 3(-)
+21dBu Unbal 1 ⁄ " TRS; Tip (+)
4
+46dBu Ring (-)
Sleeve Gnd
+21dBu Unbal RCA jacks
Bal Connector
Unbal
Unbal 1/4" Phono Tip (+)
Sleeve Ground
Unbal 1/4" Tip (+)
Sleeve Ground
Unbal RCA