Technical Description; Function Description; Display Elements Of The Camera Image - Dometic CAM1000 Instrucciones De Montaje

CAM 1000 / BSC 01
• The object must move faster than the vehicle.
• The system does not detect any hidden objects.
• The detection of objects in darkness is limited.
This product is only suitable for the intended purpose and application in accordance with this
instruction. Any other use, deviating from the intended use, is not allowed! Dometic accepts no
liability for any loss, damage or injury incurred, directly or indirectly due to other as the intended
use.
5

Technical description

5.1

Function description

The camera image is evaluated via the control unit in the camera. Objects moving in the same
direction as the vehicle are detected and marked on the monitor with a movement arrow.
The arrow moves with the detected object and serves as an optical signal. Optionally, an acoustic
warning signal can be added.
The system includes the M75LXAHD monitor, which is mounted on the right A-pillar and provides
the driver with images of the situation next to the vehicle.
The CAM1000 / BSC01 camera has the following features:
• CMOS camera with moving object detection function
• Evaluation of the signal edge when the object enters the active area of the image
• Defined active (C) and inactive (D) image area (fig. 5)
• Minimization of messages by exclusion of irrelevant objects (filtering by direction of movement)
• Optical signaling by dynamic arrow indicator
• Acoustic warning signal
• Speed-dependent activation via GPS receiver
• Automatic activation of the monitor
5.2

Display elements of the camera image

Symbol
EN
Function
Active area
Reference line
Description
The red field marks the detection range of the
CAM1000. It appears for about 3 seconds after the
ignition is switched on. It indicates the area where
the camera can detect an object. This field can be
used to adjust the camera so that its detection
range covers the detection range prescribed by
the BMVI recommendation.
The reference line appears permanently. It must be
positioned parallel to the right vehicle contour.
Technical description
7