Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USE
s
AfEty PrECAutions
•
Before using this appliance, please make sure it is placed on a flat and stable
surface.
•
Place the radiator at least 90 cm away from the wall, furniture and curtains.
•
Make sure the electrical voltage in your home is compatible with that indicated
on the appliance's rating plate (230 V~).
•
This radiator contains oil and takes a long time to cool down after being switched
off. Care should be taken to avoid burns even after the appliance has been
switched off!
•
Allow the radiator to cool down before moving it and use the handle to carry it.
f
irst usE
Your appliance may give off a mild odour when switched on for the first time. This
is normal. Adequate ventilation must therefore be provided. This odour will only be
temporary and will dissipate quickly.
u
sE
1.
The thermostat and the power selector knob must be in position "0" and "Min".
2.
Plug the radiator into a wall socket.
3.
Turn on the radiator in one of the following positions:
- Position I: low temperature
- Position II: medium temperature
- Position III: high temperature
The indicator light comes on when the radiator is in operation.
4.
The temperature can be adjusted by means of the thermostat. Turn the thermostat
knob clockwise to increase the temperature or anticlockwise to decrease it.
5.
Once the desired temperature has been reached, slightly turn the knobs
anticlockwise until the indicator light goes out. This will maintain the temperature.
As soon as room temperature falls below the set temperature, the appliance
automatically switches on again until the desired temperature has been reached
again.
This allows you to maintain a constant temperature while saving electricity.
6.
When you have finished, return the thermostat knob and the power selector
knobs to their initial position: "0" and "Min", then unplug the radiator.
Never cover or place any type of object on the radiator when in operation.
V.7.0
24
MAINTENANCE AND CLEANING
•
Always unplug the appliance from the wall socket before cleaning it.
•
Never immerse the the power cord, plug or appliance in water or any other
liquid.
•
To clean the exterior surface of the appliance, use a slightly damp cloth. Then dry
it thoroughly with a soft, dry cloth before using it again.
•
Do not use any detergents or chemicals. Do not use wax or shine products as they
may react to heat and cause discolouration.
•
If you do not use the appliance for a while, unplug it, wrap the power cord around
the reel and store the appliance in a dry, dust-free place
25
V.7.0
Tabla de contenido
