Technical Data; Transportation And Storage; Cleaning And Maintenance - Royal Catering RCFW 70-600ECO Manual De Instrucciones

TECHNICAL DATA

Product name
Model
Power supply [V] / Frequency [Hz]
Rated power [W]
Weight [kg]
SCOPE OF THE APPLICATION
Meat mincer is designed to mince and chop meat.
The user is liable for any damage resulting from non-intended use of the device!
BERORE THE FIRST USE
Upon receipt of the goods, check the packaging for defects and open the packaging if there are no damages.
If the packaging is damaged, please contact your transport company and distributor within 3 days, and
document the damages as detailed as possible. Do not turn the package upside down! When transporting
the package, please ensure that it is kept horizontal and stable.
DISPOSING OF THE PACKAGING
Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate condition!
INSTALLING THE APPLIANCE
POSITIONING THE MACHINE
The machine should be positioned on a dry and stable surface, vertically so as to prevent movement during
operation. The machine should be positioned on a flat, level surface, with sufficient load capacity for the
machine and its contents. Ensure unobstructed access to the electricity plug at all times. Make sure the
power source reflects the parameters on the rating plate! Prior to first use remove and wash all elements
and wash the entire machine.
MACHINE OPERATION – BASICS
Assembly
Device description:
1. Switch
2
3
6
4
2. Meat tray
3. Meat feeder
5 4. Black lever for aligning tray
1
5. Minced meat discharge
6. Oil cap
Regularly check the oil level in the device. Unscrew the oil filler cap (6) and check if the oil is visible. The
total oil capacity is 50 ml. Use gear oil for the food industry.
8
MEAT MINCER
RCFW 70-600ECO RCFW 140-850ECO
230~ / 50
600 850
11 19,5
"0" off position
"1" normal device operation
"2" reverse (in the event of meat jamming in the device
use the reverse function to clear it)
Rev. 13.06.2017
Assemble the devices in accordance with the overview illustrations below.
Device use
Before use assemble the device correctly and connect to a power source. Insert small chunks of meat.
Always use the meat pusher to press meat into mincer.

TRANSPORTATION AND STORAGE

During transport, the machine should be protected from shaking, crashing and turning upside down. Store it
in a properly ventilated place with dry air and without any corrosive gas.

CLEANING AND MAINTENANCE

• Disconnect the machine from the electricity when cleaning it.
• Use cleaner without corrosive substances to clean surface.
• After cleaning, all parts should be able to dry before the machine is to be reused
• Store the unit in a dry, cool place, free from moisture and direct exposure to sunlight.
• Never spray the device with water jets.
REGULAR CONTROL OF THE DEVICE
Check regularly whether the device is damaged. If it should be damaged, please stop using it immediately and
contact your customer service to solve the problem.
What to do in case of a problem?
Please contact your customer service and prepare the following information:
• Invoice number and serial number (the latter is to be found on the technical plate on the device).
• If relevant, a picture of the damaged, broken or defective part.
• It will be easier for your customer service clerk to determine the source of the problem if you give
a detailed and precise description of the matter. The more detailed your information, the better the
customer service will be able to solve your problem rapidly and efficiently!
CAUTION: Never open the device without the authorization of your customer service. This can lead to
a loss of warranty!
Rev. 13.06.2017 9