Nederman TX 3000 ESD Manual De Uso página 3

Installation
It is very important that users of the machine
carefully read this user manual before the
machine is installed and put to use.
Install TX 3000 as follows:
1 Connect the mains cable (10) between the
inlet socket (7) and a main socket with requi-
red voltage, according to rating plate.
2 Connect your application to the machine's
hose connection Ø 32 mm (3+4).
CAUTION !
The machine must be placed in a ventilated
room on a hard and flat surface to provide
enough cooling air for the motor.
7
10
TX 3000 ESD
CAUTION !
3
4
Pipe system
The pipe system that Tx 3000 is connected to
must not leak at the joints or connections.
CAUTION !
When pipes or hoses which are connected to
the machine are dismantled as the machine is
running, there is a risk that material can be
vacuumed into the machine.
It is not allowed to vacuum explosive or fla-
mable gases with the machine.
It is not allowed to vacuum fluid with the
machine.
ENGLISH GB
3