Dometic DW6 Instrucciones De Uso página 9

Ocultar thumbs Ver también para DW6:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
DW6
CAUTION!
!
 Disconnect the refrigerator from the mains
– Before cleaning and maintenance
– After use
 Food may only be stored in its original packaging or in suitable containers.
NOTICE!
A
 Check that the voltage specification on the type plate is the same as that of
the power supply.
 Only use the cable supplied to connect the refrigerator to the AC mains.
 The refrigerator is not suitable for transporting substances which are caustic
or contain solvents.
 Never pull the plug out of the socket by the connection cable.
 Disconnect the refrigerator and other electric consumers from the battery
before connecting the quick charging device.
 Only select operation with DC power supply (battery mode) if the vehicle
engine is running and providing sufficient voltage to the light system, or if you
are using a battery monitor.
2.2
Operating the refrigerator safely
DANGER!
D
 Do not touch exposed cables with your bare hands.
CAUTION!
!
 Before starting the product, ensure that the power supply line and the plug are
dry.
 Only use the refrigerator in a dry environment where it is protected from
splashing water and high humidity.
 Do not place any objects on the refrigerator to avoid injury by falling objects
when opening and closing the door.
NOTICE!
A
 Do not use electrical devices inside the refrigerator unless they are recom-
mended by the manufacturer for that purpose.
 Do not place the refrigerator near naked flames or other heat sources
(heaters, direct sunlight, gas ovens etc.) (fig. 1, page 2).
 Danger of overheating!
Always ensure sufficient ventilation so that the heat generated during opera-
tion can dissipate. Make sure that the refrigerator is sufficiently far away from
walls and other objects so that the air can circulate (fig. 2, page 2).
 Ensure that the air vents are not covered.
EN
Safety instructions
9
Tabla de contenido

Solución de problemas

loading

Tabla de contenido