Safety Information; Definition Of Signal Warnings And Symbols; Product Specific Safety Notes - Mettler Toledo P-56RUE Manual De Usuario

1 Safety Information

Read and understand the information in this User Manual before you use the instrument.
•
Keep this User Manual for future reference.
•
Include this User Manual if you pass on the instrument to other parties.
•
If the instrument is not used according to the information in the Operating Instructions or if it is modified, the
safety of the instrument may be impaired and Mettler-Toledo GmbH assumes no liability.
Finding more information

1.1 Definition of signal warnings and symbols

Safety notes are marked with signal words and warning symbols. Ignoring the safety notes may lead to
personal injury, damage to the instrument and malfunctions.
WARNING
CAUTION
NOTICE
Note

1.2 Product specific safety notes

General Safety Information
Your instrument corresponds to the state of the art technology and complies with all recognized safety rules,
however, certain hazards may arise in extraneous circumstances. Do not open the housing of the
instrument: It does not contain any parts which can be maintained, repaired or replaced by the user. If you
ever have problems with your instrument, contact your authorized METTLER TOLEDO dealer or service repre-
sentative.
This printed document must be read and understood before using the instrument. This printed document
must be retained for future reference.
Always operate and use your instrument only in accordance with the instructions contained in this
document. The instructions for setting up your new instrument must be strictly observed.
If the instrument is not used according to the Operating Instructions, protection of the instrument may
be impaired and METTLER TOLEDO assumes no liability.
The instrument must not be altered or modified in any way. Only use METTLER TOLEDO original spare parts
and accessories.
Safety Notes
12 Safety Information​
Additional information about this printer can be found in the Operating Instructions on the CD-
ROM or online.
for a hazardous situation with medium risk, possibly resulting in death or severe
injury if not avoided.
for a hazardous situation with low risk, resulting in minor or moderate injury if not
avoided.
for a hazardous situation with low risk, resulting in damage to the instrument, other
material damage, malfunctions and erroneous results, or loss of data.
(no symbol)
for useful information about the product.
General hazard
WARNING
Risk of electric shock
1 Do not open the AC adapter housing. Make sure that the AC adapter does not come in
contact with liquids.
2 Use only the 3-pin power cable with equipment grounding conductor which was supplied
with your instrument and only a 3-pin grounded outlet must be used.
Electrical shock Hot surface
Printer