Cleaning And Care - Unold 87815 Manual De Instrucciones

10. underarms: Put your arm up as far as you
can in order to tighten the skin. Shave the
area moving the appliance backwards and
forwards.
11. Intimate area: With long hair use the comb
attachment to do a pre-cut attaching the
accessory to the appliance. If necessary,
tighten the area you want to shave and move
the appliance slowly over the skin against
the direction of hair growth.
12. contour trimming: Carefully cut the hair
according to the desired contour.
13. Make sure that the shaving head is always in
contact with the skin. Shaving will be easier,
when you tense the skin with your free hand.

cLeanIng anD care

Attention: The shaving head has sharp and pointed parts. Handle with care in order to avoid injuries!
1. always switch the appliance off using the eIn/
aus [on/off] switch before disconnecting the
mains adapter from the wall socket.
2. Never immerse the appliance or the lead
cable in water or other liquids to clean
them. Make sure that no water penetrates
the casing of the appliance.
3. Never clean the appliance and the acces-
sories in the dishwasher.
4. Do not use any scrubbing sponges, abra-
sive agents, steel wool, metal objects,
disinfectants or hot cleaning agents, since
they can damage the appliance.
5. Clean the appliance with a soft, damp cloth.
6. cleaning the shaving head:
Schalten Sie das Gerät aus und ziehen Sie
Switch the appliance off using the EIN/AUS
[ON/OFF] switch before disconnecting the
mains adapter from the wall socket. Detach
the comb attachment from the appliance.
Remove the shaving head pushing it
carefully backwards.
Clean the shaving head and the inside of the
appliance with the brush provided.
Please do not knock the shaving head as
this may damage it.
Rinse the shaving head with lukewarm water
drying it thoroughly with a soft fluff-free
cloth afterwards.
16
14. If hair gets caught in the shaving head,
switch the appliance off and clean the
shaving head as described in the chapter
„Cleaning and care".
15. After finishing the hair cut, switch the app-
liance off pushing the button EIN/AUS [ON/
OFF].
16. Clean the appliance after every use.
17. Directly after shaving do not use any care
products that contain alcohol as these may
cause skin irritation. Use mild care lotions
or creams instead.
In order to eliminate residual moisture we
additionally recommend to dry the shaving
head with a hair dryer (medium temperature
adjustment).
Put a drop of care oil onto the shaving head
and remove excessive oil with a fluff-free
cloth.
Reattach the shaving head to the appliance
inserting the clips on the bottom side into
the appliance and pressing it upwards into
place. Make sure that the shaving head
latches into place properly before using the
appliance again.
7. Protect the appliance from dust and
regularly clean the shaving head with a
soft brush detaching it carefully from the
appliance (see illustration) and removing
dust and hair using the brush. Reattach the
shaving head.
8. Depending on the frequency of usage, the
shaving head has to be replaced regularly,
but at the latest after two years. Specialist
shops and our after-sales service offer the
corresponding
corresponding order form can be found on
page 57.
replacement parts. The