Technical Data - Ritter ET 10 Instrucciones De Montaje

• Wipe down the external hous-
ing parts with a damp cloth.
CAUTION: risk of damage
to the appliance:
– Do not use any abrasive
cleansers, sponges with
rough surfaces or hard
brushes to clean the appli-
ance.
– Never clean the interior of
the toasting slot.
Cleaning the drawer
Remove the toaster from the
drawer:
Push the slide bar lock (11)
in the direction of the arrow.
Snap the lock clip (12)
upwards.
Slide the toaster in the direc-
tion of the arrow.
• Lift the toaster out of the
drawer.
• Clean the drawer according
to the manufacturer's specifica-
tions.
Replace the toaster in the
drawer:
Place the toaster on the hold-
ing fixtures (13) in the drawer.
Slide the toaster in the direc-
tion of the arrow.
Press down on the lock
clip (12) until it snaps into place.
• Plug the cable into the socket.
STORAGE
Empty the crumb drawer (9).
Holding the toaster by its
handle (1), fold it down into
the drawer until it is in a fully
horizontal position.
CAUTION: Risk of burns:
The toaster's external housing
may become very hot. You
should therefore always use
the handle when folding the
toaster away.
DISPOSAL
Once it has reached
the end of its service
life, this product must
not be disposed of as
normal domestic waste. It must
be taken to a dedicated
collection point for the recycling
of electrical and electronic
devices. This is indicated by
the symbol on the product, the
operating instructions or the
packaging.
Its material components can
be re-used in accordance with
their identification. By contribut-
ing to the reuse, recycling and
other forms of recovery of used
appliances, you can play a
valuable role in protecting our
environment.
Please consult your local
authority's waste disposal
office.
REACh DIRECTIVE
See www.ritterwerk.de
SERVICE, REPAIRS AND
SPARE PARTS
Please contact your local after-
sales service for all service,
repairs and spare parts mat-
ters! See www.ritterwerk.de

TECHNICAL DATA

This appliance complies with
the following regulations and
directives:
– 2004/108/EC
– 2006/95/EC
– 1935/2004/EC
– EuP 2009/125/EC
– 2011/65/EU
The appliance thus complies
with the CE specifications.
Mains voltage/power consump-
tion: Refer to the type label on
the underside of the appliance.
Safety class: 1
GUARANTEE
EXPLANATION
This ritter appliance comes
with a two-year manufacturer's
warranty, starting with the date
of purchase and in accordance
with the EU warranty directives.
In the event of a warranty claim
or for servicing, the appliance
must always be sent to the
appropriate national customer
service centre.
English
15