Adjusting the sound
1
2
Adjust the level.
FAD *
1
(fader)
Adjust the front and rear speaker
balance.
BAL (balance)
Adjust the left and right speaker
balance.
LOUD (loudness)
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
SUB.W *
(subwoofer)
2
Adjust subwoofer output balance.
VOL.A *
3
(volume adjust)
Adjust and store auto-adjustment
volume level for each source,
comparing to the FM volume level.
VOL (volume)
Adjust the volume.
*
1
If you are using a two-speaker system, set the fader
level to "00."
*
2
This takes effect only when a subwoofer is connected.
*
3
You cannot make an adjustment for FM. "FIX"
appears.
*
4
Depending on the amplifier gain control setting. (See
page 43 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table on pages 42 and 43.
1
Enter the PSM settings.
2
Select a PSM item.
R06 to F06
3
Select or adjust the selected PSM item.
L06 to R06
LOUD ON or
LOUD OFF
4
Repeat steps 2 and 3 to adjust other
PSM items if necessary.
00 to 08;
5
Finish the procedure.
initial: 04
–05 to +05;
initial: 00
00 to 30
(or 50) *
4
Continued on the next page
SETTINGS
41