JVC KD-ADV6270 Manual De Instrucciones página 43

Symptom
• The iPod or D. player does not turn on or does
not work.
• Buttons do not work as intended.
• The sound is distorted.
• "NO IPOD" or "NO DP" appears on the display. Check the connecting cable and its connection.
• Playback stops.
• No sound can be heard when connecting an
iPod nano.
• No sound can be heard.
• "ERROR 01" appears on the display when
connecting a D. player.
• "NO FILES" or "NO TRACK" appears on the
display.
• "RESET 1" – "RESET 7" appears on the display. Disconnect the adapter from both this unit and iPod/
• "RESET 8" appears on the display.
• The iPod's or D. player's controls do not work
after disconnecting from this unit.
Remedy/Cause
• Check the connecting cable and its connection.
• Change the battery.
• Update the firmware version.
The functions of the buttons have been changed. Press
MODE before performing the operation.
Deactivate the equalizer either on this unit or the iPod/
D. player.
The headphones are disconnected during playback. Restart
the playback operation (see page 23).
Disconnect the headphones from the iPod nano.
Disconnect the adapter from the D. player. Then, connect
it again.
No tracks are stored. Import tracks to the iPod or D. player.
D. player. Then, connect it again.
Check the connection between the adapter and this unit.
Reset the iPod or D. player.
43