ENGLISH
Welcome to the VortCare Experience
Dear Customer,
Congratulations on your purchase of a Deumido Compact
This product has been meticulously designed with many hours of research and development going into its creation
toensure the best experience for you, the end user.
Please read the user manual carefully to familiarize yourself with the various features and functions of your newly
acquired Deumido. Any questions, suggestions, or comments can be sent at:
Features
This compact dehumidifier works thanks to the Deumido Solid State technology, which allows it to extract humidity from
the environment while keeping it light and quiet. The Solid State module becomes, with very low power consumption,
extremely cold on one side, allowing for water to condensate on the surface of the heatsink, and dripping into the tank.
1.
Power Button
2.
Status Indicator
3.
Air Inlet
4.
Air Outlet
5.
DC Power Socket
6.
Water Tank
7.
Hydro-Safe Float Switch
8.
Water Drainage Hole
9.
DC Power Adapter
10. AC Connector
11. DC Power Jack
Getting Started
1. Connect the power adapter to the Deumido Compact and then to the mains outlet.
2. Switch on the unit by pressing the power button. During normal operation the status indicator lights up green and the
unit extracts up to 300ml of humidity per day from the environment.
3. To switch off the unit press the power button again, the status indicator LED shuts off.
Emptying the Water Tank
1. The water tank has a capacity of 700ml. When the tank is full, the HydroSafe technology shuts off the unit
automatically and the status LED lights up orange. When this happens, turn off the unit completely by pressing the
power button and remove the water tank.
2. Pull out the plug from the water drainage hole and empty the tank.
3. Replace the plug and slide the tank back in your Deumido Compact.
4. Turn the unit back on by pressing the power button. The status indicator now lights up green and the unit begins
extracting humidity again.
Maintenance
Ensure the dehumidifier is unplugged from the wall socket. Use a soft cloth to clean any dust or debris from the surface
of the unit and air inlets. It is recommended to do this once per month.
2
3
1
5
9
10
11
4
7
8
6
5