Testing The Hedge Trimmer And Battery; Checking The Controls; Testing The Battery - Stihl HSA 56 Manual De Instrucciones

9 Testing the Hedge Trimmer and Battery

► If the cutting blades continue to run after about 1 second:
Remove the battery and contact your STIHL servicing
dealer.
Your hedge trimmer has a malfunction.
► Push the retaining latch into position
9 Testing the Hedge Trimmer and
Battery
9.1

Checking the Controls

Retaining latch, trigger lockout and trigger
► Remove the battery.
► Push the retaining latch into position
► Attempt to pull the trigger without depressing the lockout
lever.
► If the trigger can be pulled: Do not use your hedge trimmer
and contact your STIHL servicing dealer.
Retaining latch or trigger lockout is faulty.
► Push the retaining latch into position
► Depress the trigger lockout lever and hold it in that
position.
► Pull the trigger.
► Release the trigger and trigger lockout lever.
► If the trigger or trigger lockout is stiff or does not spring
back to the idle position: Do not use your hedge trimmer
and contact your STIHL servicing dealer.
Trigger or trigger lockout is faulty.
Switch Lever
► Remove the battery.
► Depress the switch lever and release it again.
► If the switch lever is stiff or does not spring back to its idle
position: Do not use your hedge trimmer and contact your
STIHL servicing dealer.
The switch lever has a malfunction.
0458-714-9821-C
Switch on the hedge trimmer
► Fit the battery.
► Depress the switch lever and release it again.
► If the cutting blades have run or are running: Do not use
.
your hedge trimmer and contact your STIHL servicing
dealer.
The trigger has a malfunction.
► Depress the trigger lockout lever and hold it in that
position.
► Pull the trigger and hold it there.
► If the cutting blades run: Do not use your hedge trimmer
and contact your STIHL servicing dealer.
The switch lever has a malfunction.
► Depress the switch lever and hold it in that position.
.
The cutting blades run.
► If 3 LEDs flash red: Remove the battery and contact your
STIHL servicing dealer.
There is a malfunction in the hedge trimmer.
► Release the switch lever.
The cutting blades stop running after about 1 second.
.
► If the cutting blades continue to run after 1 second:
Remove the battery and contact your STIHL servicing
dealer.
Your hedge trimmer has a malfunction.
9.2
► Press button on battery.
The LEDs glow or flash.
► If the LEDs do not glow or flash: Do not use the battery
and contact your STIHL servicing dealer.
There is a malfunction in the battery.

Testing the Battery

English
47