Fault State Description - H.Koenig TI700 Manual De Usuario

enter into the standby state, so the program will be initialized.
In case of the insulation function selected, if the kettle is lifted up from the base, this state
before lifting will be kept; if the base can not detect the kettle within one minute, the beep
sound will be given to enter into the standby state and the program will be initialized; if the
base can detect it within one minute, the front lifting will continue on.
In standby mode, all LEDs are off and the heating process stops.
In standby mode, if there is no kettle on the base, all buttons and indicators disable.
Lid-opening button
Fig. 6
VI. Fault state description:
1. In case of NTC short-circuit, all indicators flash and the heating process stops, so all
buttons will disable.
2. In case of NTC open-circuit, all indicators flash and the heating process stops, so all
buttons will disable.
3. In case of kettle dry burning, all indicators flash and the heating process stops, so all
buttons will disable.
VII. Warnings:
1. This product is designed only for burning water or cooking teat indoors, with other
liquid into this kettle or other purpose forbidden. In use process, do not replace the lid
for cooking the tea after burning the water!
2. Before use, be sure to add the water and then turn on the power.
3. Do not exceed the rated maximum capacity, to prevent the boiling water overflow to
cause the scald.
4. Be sure to move the kettle only after the power is cut off; Do not touch the kettle filling
with boiling water except for handle, to avoid burns.
5. In use process, do not hang the power wire near the table or similar part to avoid any
danger.
6. To avoid the water erode the internal parts, do not immerse the kettle into any liquid.
Please refer to the "Descaling".
7. This device is not intended for use by persons with reduced capacity on the physical,
mental or sensory or lack of experience and knowledge (including children), unless he has
them was asked to monitor or if they have had instructions on the use of the appliance by
a person responsible for their safety. Children should be supervised to ensure they do not
play with the device.
8. If the power cord is damaged, it must be replaced with an after-sales service to avoid
any danger.
9. Children should be supervised to ensure that they do not play with the appliance.
This appliance is intended to be used in household and similar applications such as:
Fig. 7 Fig. 8