Important Safety Instructions - Televes OSP4T-1550 Manual De Instrucciones

EN

Important Safety Instructions

Important safety instruccions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use the adaptor near water.
6. Clean the AC/DC adaptor only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifi ers)
that produce heat.
9. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit the apparatus.
10. Only use attachments/accessories specifi ed by the
manufacturer.
11. Unplug this apparatus during lightning storms or when
unused for long periods of time.
12. Refer all servicing to qualifi ed service personnel. Servicing
is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the AC/
DC adaptor, the the AC/DC adaptor has been exposed to
rain or moisture, the apparatus does not operate normally, or
has been dropped.
Warning
Reduce the risk of fi re or electric shock, do not expose this
AC/DC adaptor to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and
no objects fi lled with liquids, such as vases, shall be placed on
the AC/DC adaptor .
Safe operation
Power requirements for the AC/DC adaptor are 100-240V~
50/60 Hz.
Should any liquid or object fall into the AC/DC adaptor,
please refer to qualifi ed personnel for service.
To disconnect the equipment from the mains pull the plug
never the cable.
It is strongly recommended not to connect the equipment to
the mains until all connections have been done.
Do not connect the equipment to the mains until it has been
screwed to the wall.
The socket outlet shall be installed near the equipment and
shall be easily accessible.
Do not take the cover off the equipment without
disconnecting it from the mains.
Safe installation
For the AC/DC adaptor, ambient temperature should not be
higher than 113°F.
Do not place the equipment near heat sources or in a highly
humid environment.
Do not place the equipment in a place where it can suff er
vibrations or shocks.
Please allow air circulation around the equipment.
Do not place naked fl ames, such as lighted candles on or near
the product.
Safety measures
Warning
This product emits an invisible laser beam. Avoid contact
with laser radiation. The use of equipment such as
binoculars or magnifying glasses may increase damage
caused to the eyes.
INVISIBLE LASER RADIATION
DO NOT WATCH DIRECTLY WITH
OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
According to EN 60825-1: 2014
Maximum Output: 8dBm
Emitted Wavelength (s): 1550nm
Caution
- The use of controls or adjustments, as well as diff erent
procedures beyond those specifi ed in this manual could result
in exposure to harmful radiation.
- Read and follow the instructions in this manual very carefully,
keep this manual for future reference.
- Do not use the equipment in a way that does not conform
to these operating instructions or under any condition that
exceeds the indicated environmental specifi cations.
- The user cannot service this equipment. For technical
assistance, contact our technical assistance department.
- The laser beam should not be pointed at people and/or
animals.
3