Identification And After-Sales Service; After-Sales Service; Spare Parts; Identification And Servicing - Grillo 2500 Manual De Instrucciones

26) Before starting any work with the machine, check that all the accident prevention systems with which
it is equipped are in perfect working order. They must never be disabled or tampered with.
27) Before starting work, check that the nuts and bolts securing the tiller and hoes are perfectly tight.
28) All protective fittings (hoods, mudguards, etc.) must be kept in place during operation.
29) Never clean the tiller with the engine running.
30) Never use the machine barefoot.
31) Never change the engine settings, especially the maximum r.p.m.
32) Allow the engine to cool before placing the machine indoors.
33) CAUTION: to reduce the risk of fire, keep the engine, the exhaust pipe and the exhaust manifolds
free from grass, leaves, dust, etc...
34) If you have to empty the fuel tank, do this outdoors.
35) Tillers must be driven by only one operator.

AFTER-SALES SERVICE

This handbook provides instructions for use of the motor hoe and for correct basic servicing which the
user can carry out himself. For all procedures not described in this handbook, contact your local dealer.

SPARE PARTS

Always use original spare parts, as they are the only ones to offer complete safety and
interchangeability. Always state the serial number of the machine and the code number or the part to be
replaced when ordering. For engine parts, refer to the specific handbook.
GUARANTEE
The guarantee is given in compliance with the current law. The dealer will have to give the client a copy
of the registration card of the machine, which they will print up from the Grillo website.
guarantee of the relative manufacturers apply.
ORDERING SPARE PARTS
Always state the machine serial number and the code number of the part to be replaced. Contact your
local dealer. For further information, our address is:
GRILLO S.p.A.
Via Cervese 1701 - 47521 CESENA (FC) - ITALY
Tel. 0039 / 0547 / 633111 - Fax 0039 / 0547 / 632011
Web site: www.grillospa.it - E-mail:
RECOMMENDED SPARE PARTS TO HAVE ON STOCK
1 throttle cable
1 clutch cable
1 throttle lever
2 right tiller tines with screws
2 left tiller tines with screws
2500-3500/ Translation of the original instructions

IDENTIFICATION AND AFTER-SALES SERVICE

2500
3500
[email protected]
The tiller is fitted with a nameplate on the frame
with the serial number of the machine. This number
must be stated when requesting service or ordering
spare parts.
6
For the engine the