Volume; Switching Demo Mode On/Off; Displaying Version Numbers; Traffi C Information - Blaupunkt San Francisco 300 Instrucciones De Manejo

Placing the device in operation | Traffi c information

Volume

Adjusting the volume
You can adjust the volume in steps from 0 (off) to
50 (maximum).
u Turn the volume control 4 to change the
volume.
Note:
If a telephone or navigation system is connect-
ed with the car sound system as described in
the installation instructions, the car sound
system is muted in case of a telephone call
or navigation announcement and the call or
voice output is played via the loudspeakers of
the car sound system. The display then shows
"TELEPHONE".
Muting the car sound system (Mute)
You can quickly reduce the volume to a preset
level.
Briefl y press the On/Off button 3 to mute
u
the car sound system or to reactivate the pre-
vious volume.
While it is switched low, the display shows
"MUTE".
To adjust the mute volume, please read the sec-
tion "Performing settings in the user menu", "Mute
LVL" menu item in the chapter "User settings".

Switching demo mode on/off

The demo mode shows the functions of the car
sound system as scrolling text on the display. You
can turn the demo mode on or off:
u
Switch off the car sound system if it is not
already turned off.
u Press and hold the buttons MENU•OK ?
and 2 < at the same time and press the On/
Off button 3.
The car sound system switches on. The dis-
play briefl y shows "DEMO MODE" if you
switched on the demo mode. By pressing any
button, the demo mode is interrupted and
you can operate the device.
28

Displaying version numbers

You can display the version numbers of the differ-
ent device components.
u
Switch off the car sound system if it is not
already turned off.
u Press and hold the buttons MENU•OK ?
and 1 < at the same time and press the On/
Off button 3.
The car sound system switches on. The display
shows the version number of the fi rst compo-
nent. The fi rst character identifi es the compo-
nent: P = CPU, E = EPROM, A = Accordo.
u
Press the button
version number of the other components.
Press the MENU•OK button ? to return to
u
the previously played audio source.
Traffi c information
In the tuner region "EUROPE", an FM station can
identify traffi c reports by means of an RDS sig-
nal. If the priority for traffi c announcements is
switched on, a traffi c announcement is automati-
cally switched through, even if the car sound sys-
tem is currently not in radio mode or if a station of
the wavebands MW or LW is set.
If priority is switched on, the display shows the
traffi c jam symbol (
during a switched-through traffi c announcement.
To switch the priority on and off, please read the
section "Performing settings in the user menu",
"TRAF" menu item in the chapter "User settings".
Notes:
• The volume is increased for the duration
of the switched-through traffi c announce-
ment. You can adjust the minimum vol-
ume for traffi c announcements (see the
ch. "User settings", section "Performing
settings in the user menu", "TA VOLUME"
menu item).
• To cancel a switched-though traffi c an-
nouncement, press the DIS/ESC button
=.
5 / > to display the
). "TRAFFIC" is displayed