General Safety Instructions; Technical Specification; Cleaning, Maintenance; Cleaning & Maintenance - Reer EasyHeat Flex Manual De Uso

EasyHeat Flex - changing table heater
We are pleased that you have chosen this product and would like to thank you the trust you are showing in us. To
enjoy the changing table heater to the full, we would ask you to read the following instructions carefully, store this
instruction manual in a safe place and pass it on to the relevant user.
The changing table heater generates comfortable instant heat in the area around changing tables. It can also be
used to warm up bathrooms, hobby rooms, entrance halls, protected patios and balconies quickly. The radiant heat
ensure that the surrounding space warms up economically within a few seconds.
Please take a few minutes to read the safety instructions carefully and in full. The instructions in the manual must
be followed to avoid damaging the changing table heater. At worst, the unit may constitute a safety or accident
hazard for your child, yourself or others.3

General safety instructions

! This product is not intended as a main heating unit!
! The unit must only be used for the purposes described herein. Improper use may result in the loss of any and
all claims under warranty.
! Check that the information on the nameplate corresponds with the mains voltage in your area.
! The unit must not be used if it shows any sign of a fault.
! If the unit is used as a changing table heater, it must never be used without supervision.
! The maximum exposure time must not exceed 15 minutes.
! A minimum distance of 100 cm between the heater and the table must be observed at all times.
! Keep the supply line away from all hot equipment components, as well as other electrical appliances.
! Avoid additional heat radiation, such as sunlight or other sources of radiation, as this can cause your baby's
body temperature to rise.
! The heater must not be used, if a child has a temperature, as this may cause overheating.
! Do not touch the unit when it is in operation.
! The equipment must be connected directly to a power outlet. Do not connect the equipment to units such as
a timer, remote control unit etc., as this constitutes a fire hazard.
! The unit remains hot even after it is switched off. Do not cover the changing table heater! Fire hazard.
! Remove all packaging and any surplus components before first use to prevent your child being injured or choking.
10
! Use the unit only out of the reach of children. Secure the power lead and ensure that it cannot be accidentally
pulled out causing the unit to fall on the floor.
! This equipment is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience or knowledge, unless they are supervised whilst using it or have been shown
how to use it correctly by a person responsible for their safety.
! Do not use the equipment if it or its power lead is damaged.
! Repairs must be carried out by qualified and skilled personnel only. Improper repairs may pose considerable
risks to the user – this includes changing the power lead.

Technical specification

• rated voltage: 230 V AC • integrated switch-off function if tilted (tilt angle: 25°)
• output: 500 W • lead length: 185 cm (incl. safety plug)
• mounting style: Power lead • heat radiation and temperature distribution tested in accordance
with the medical product standard (IEC60601-2-21:2009, AMD1:2016)
• protection class: 1

Cleaning, maintenance

• Before cleaning, ensure that the unit is switched off and cooled down (pull out the power plug). Clean the
surface with a dry, slightly damp cloth. The reflector and heating tubes must be cleaned by skilled personnel only.
• This product does not require any special maintenance.
• Repairs must be carried out by skilled personnel only.
11