Roadstar DJ-880BT Manual De Instrucciones página 4

1 English
LOCATION OF CONTROLS
1. AUX-IN
2. GUITAR INPUT
3. MICROPHONE INPUT
4. USB CHARGER
5. LCD DISPLAY
6. USB SOCKET
7. FUNCTION BUTTON
8. SKIP-
9. PLAY/PAUSE
10. SKIP+
11. ON/OFF
12. GUITAR VOLUME
13. MICROPHONE VOLUME
14. CHARGE LED
15. ECHO REGULATOR
16. BASS REGULATOR
17. FREQUENCIES EQUALIZER
18. TREBLE REGULATOR
19. MAIN VOLUME
20. MICROPHONE ON/OFF
POWER SUPPLY
This unit operates from a main supply of 100-240V, 60/50Hz. Connect the AC power cord to the AC household main
outlet. Ensure that the voltage is as indicated on the rating plate on the rear of the unit.
Connect the unit to the power supply. Switch ON/OFF SWITCH (11) to ON position to turn the unit ON. Switch ON/OFF
SWITCH (11) to OFF position to switch the unit OFF.
When no sound is produced, the unit will switch OFF automatically after 15 minutes.
Press PLAY/PAUSE (9) again to resume the playback.
BATTERY OPERATION
This unit provide a Lead rechargable battery. Connect the product to the main current in order to recharge the battery.
Charge led explaination:
 LED RED: battery is charging.
 LED GREEN: battery completely charged.
 LED Flashing RED: low battery, need to be charged.
VOLUME CONTROL
 Turn MAIN VOLUME (19) to regulate the volume.
 Adjust the equalizer using ECHO (15), BASS (16) and TREBLE (18).
 If you want more precise equalizer use FREQUENCIES EQUALIZER (17) to regulate each frequence separately.
USB PLAYBACK
1. Insert the USB device's plug into the USB socket (6).
2. Press FUNCTION BUTTON (7) repeatedly to select USB mode. "USB" will be shown on the display.
3. The unit will start reading the device automatically after the connection.
 Press SKIP -/+ (8/10) to select your favorite tunes. If you hold SKIP -/+ (8/10), the playing track will go fast backward
or forward until you release the button.
 Press PLAY/PAUSE (9) to pause the playback. The track number will start blinking. Press PLAY/PAUSE (9) again to
resume the playback.
IMPORTANT: Note that USB (4) is for charging 5V/1A devices, not for playback.
AUX-IN
This unit provides an auxiliary audio input jack for connecting external audio device like MP3 players, CD players and
allow playback of your external source through the system speakers.
1. Use an audio cable (not included) with a 3,5mm stereo plugs on one end of the cable. Plug one end into the AUX-
IN jack on the main unit and plug the other end of the cable into the LINE OUT or HEADPHONE Jack of your exter-
nal audio device.
2. Turn ON the unit and your external audio device. Press AUX (13) to select AUX function. "AUX" will be shown on
the display.
3. Start to play the external device (see the user manual of the external device).