Poulan Pro PP446E Manual De Instrucciones página 7

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

• Always wear gloves when s ervicing
or
cleaning
the tines. The t ines become
very
sharp from use.
• Do not run unit athigh s peed unless culti-
vating.
HEDGE
TRIMMER
SAFETY
_DANGER:
RiSK
OF
CUT;
KEEP
HANDS
AWAY
FROM
BLADE
-
Blade
moves
momentarily
after
the trigger
is re-
leased.
Do not attempt to clear away cut ma-
terial when the blade is in motion.
Make sure
the switch
is in the OFF position,
the spark
plug wire is disconnected,
and the blade has
stopped
moving
before
removing
jammed
materialfromthecutting
blade. Donor grabor
hold the unit by the cutting blade.
Blades move
Allow blades to stop
momentarily
before removing
after the
them from the cut,
dtrigger is
WARNING:
Inspect the area before
starting
the unit. Remove
ail debris and hard
objects
such as rocks,
glass, wire, etc. that
can ricochet,
be thrown,
or otherwise
cause
injury or damage
during
operation.
• Do
not use a cutting
blade that
is bent,
warped, cracked, broken or damaged in any
other way.
Have worn or damaged parts re-
placed by your authorized
service dealer.
• Always
keep
unit
in front of your
body.
Keep all parts of your body away from the
cutting blade,
• Keep the cutting
blade and air vents clear of
debris.
SNOW
THROWER
SAFETY
_WARNING:
Keep hands
and feet
away from the rotor when starting
or running
the engine.
Never attempt
to clear the rotor
with the engine/motor
running.
Stop engine
and disconnect
spark plug before unclogging
snow or debris from discharge
chute or when
adjusting
vanes.
="=WARNING:
Never
lean over
dis-
charge
chute.
Rocks
or debris
could
be
thrown into the eyes and face and cause seri-
ous injury or blindness.
_g_,WARNING:
Inspect
the area where
the unit is to be used.
Remove
objects
that
could be thrown
or damage
the unit.
Some
objects
may be hidden by fallen snow - be
alert for the possibility.
• Direct material
discharge
away from glass
enclosures,
automobiles,
etc.
• Do not run engine at high speed while not
removing
snow.
• Be attentive
when using the snowthrower,
and stay alert for holes
in the terrain
and
other hidden hazards.
• Make
sure the rotor will spin freely
before
attaching
the snowthrower
to the power-
head.
• Ifthe rotor will not rotate freely duetofrozen
ice, thaw the unit before thoroughly
before
attempting
to operate
under power.
• Keep the rotor clear of debris.
• Do not throw snow near other people.
The
snow thrower could propel small objects at
high speed causing
injury.
• After striking a foreign
object, stop the en-
gine, disconnect
spark pIug and inspect the
snowthrower
for damage
and repair if nec-
essary
before restarting
unit.
• Never operate the snowthrower
near glass
enclosures,
automobiles
and trucks.
• Never attempt to use the snowthrower
on a
roof.
• Never operate
the snowthrower
near win-
dow wells, dropoffs,
etc.
• Never discharge
snow onto public roads or
near moving traffic.
• Clear
snow from slopes
by going up and
down;
never across.
Use
caution
when
changing
directions.
Never
clear
snow
from steep slopes.
• Let snowthrower
run for a few minutes after
clearing
snow
so
moving
parts
do
not
freeze.
• Look behind and use care when
backing
up. Exercise caution to avoid slipping or fal-
ling, especially
when operating
in reverse.
• Know how to stop quickly.
Tabla de contenido
loading

Tabla de contenido