Installation Instructions - Techfood Barilla CPM-E-UK-CH Manual De Uso Y De Instalación

GB
Cooking Pasta Machine CPM
®
3.

INSTALLATION INSTRUCTIONS

The manufacturer cannot be held responsible for any damages to persons or
property caused by incorrect installation of this appliance.
Remove the CPM form its packaging and place it on a bench, leaving a distance of at
least 10 cm between the perimeter walls and the machine and paying particular
attention to the side where the panel used to connect to the water supply is mounted.
If necessary adjust the feet so that the machine is positioned correctly.
Collect CPM-E to a suitable mains socket (see machine data label) fitted with a switch
that conforms to the applicable standards.
Do not use reducers, adapters or shunts as these may result in intermittent contacts
that can cause overheating.
When connecting the machine to the water supply, connect the tube that is provided
with the appliance to a ¾ inch threaded cold water tap. (Supply pressure min. 0,05
MPa – max 0,8 MPa)
The supply tube cannot be extended.
If the tube is too short, and the tap cannot be moved, it is necessary to purchase a
longer tube of the type that is suitable for this purpose.
Installation and User Manual 5