Indications; Safety Thermostat; Procedure In Case Of Mains Electrical Supply Failure - Techfood Barilla CPM-E-UK-CH Manual De Uso Y De Instalación

GB
d. Indications
If the following messages appear on the display CONTACT BL SUPPLIER and
CONTACT MW SUPPLIER call the Master Franchisee-Technical Partner.
If the following messages appear on the display FILL TANK, lift the panel of the
reserve tank (pos. 7 in cap. 1) and add water in the reserve water tant (pos. 6 in cap.
1) .
e. Safety thermostat
If the boiler fails to heat up but the
display does not indicate a fault, check
whether the safety thermostat has been
activated: if so, reset it be pressing the
thermostat button on the bottom of the
CPM on the left hand side (see figure on
the right)
f. Procedure in case of mains electrical supply failure
If the mains electrical supply is interrupted, when it is restored the CPM reverts to the
OFF condition ("OFF" appears in the display) and it is necessary to restore the initial
configuration as described in chapter 5/b. All settings are lost when the power is
interrupted.
18
Cooking Pasta Machine CPM
Installation and User Manual
®