Velleman VTHD05 Manual Del Usuario página 3

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling. This device should be returned to your distributor or to
a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer. Please refer to the
Service and Quality Warranty on the final pages of this manual. Contents: 1x mini drill, 1x collet nut, 1x
flexible shaft, 99x accessories (163 pcs), 1x case, 1x user manual.
2. Safety Symbols
Indicates possible physical injury, mortal danger or risk of damage to the machine Indicates possible physical injury, mortal danger or risk of damage to the machine if the instructions
are ignored.
Indicates the presence of a dangerous voltage.
3. Safety Instructions
When using electric machines, always respect local safety instructions with regard to fire risks, the risk of When using electric machines, always respect local safety instructions with regard to fire risks, the risk of
electroshocks and physical injury!
• Keep the cord away from the moving parts of the machine
• Switch the machine off immediately if it jams and remove the plug from the mains
• Compare the max. number of revolutions for the accessories with the number of revolutions of the device.
Compare the max. number of revolutions for the accessories with the number of revolutions of the device.
• When you store the device, the engine must be switched off and all moving parts must have reached a
standstill.
• Do not use collets with a piece of string or such attached to it.
• Never engage the shaft lock button while the device is in use.
• Make sure the shaft diameter of the accessory matches that of the collet nut.
• Secure the work piece with a clamping device.
• Keep your hands away from the work piece when you are using the drill.
4. General Guidelines
• Always check whether the mains voltage is suitable for your device (consult the label on the housing).
The machine has double insulation in accordance with EN 50144, an earth wire is therefore not The machine has double insulation in accordance with EN 50144, an earth wire is therefore not
necessary.
• Throw away old cords or plugs immediately. It is dangerous to connect the plug of a loose cord with the
Throw away old cords or plugs immediately. It is dangerous to connect the plug of a loose cord with the
mains.
• Only use an approved extension cord suitable for the capacity of the device. The cores must have a diameter
an approved extension cord suitable for the capacity of the device. The cores must have a diameter
2
of at least 1.5mm . Unwind the cord completely if it is on a reel.
5. Technical Specifications
shank capacity
voltage
frequency
power consumption
number of revolutions, unloaded min
weight
07.10.2013
USER MANUAL
Please read the manual thoroughly before bringing this device into service. If the
device, the engine must be switched off and all moving parts must have reached a
-1
VTHD05
This device should be returned to your distributor or to
Contents: 1x mini drill, 1x collet nut, 1x
1 ~ 3.2mm
230VAC
50Hz
135W
10,000 ~ 32,000
0.805kg
3
unsorted municipal waste; it should
efer to the Velleman
the label on the housing).
®
©Velleman nv