Preparing The System - Cardin Elettronica S504 Serie Manual Del Usuario

Use
The S504 radio control allows the remote activation of electrical and electronic appliances with its best use
in the following areas: automatic opening systems, alarm systems, and in all systems which require remote
control activation (without wires) using secret codes.
Transmitter versions
TXQ504C2
TXQ504C4
TXQPRO504C4
TXQPRO504C4A
Receiver versions
RQM504C2
RSQ504C2
RSQ504OC2
RCQ504C1
Memory module (M1)
The module is furnished with a non-volatile EEPROM type memory and contains the transmitter codes and
allows you to memorise up to 1000 codes. The programmed codes remain stored even in the absence of power.

PREPARING THE SYSTEM

To obtain the best results from the radiocontrol sysyem the aerial installation site should be carefully
chosen. 'Range' is intended to mean the working distance, measured in free space, between the
receiver and the transmitter with the aerial installed.
The range is therefore closely linked to the technical characteristics of the system and varies
according to the characteristics of the site in which the system is located. For best performance
we advise you to use the Cardin ANS400 aerial. Wire the aerial to the receiver using a coaxial
cable RG58 (impedance 50Ω) with a maximum length of 15 m.
Miniaturized transmitters
Miniaturized transmitters
Industrial transmitters
Industrial transmitters + external aerial
Mini receiver
Slot-in receiver card
Slot-in receiver card open collector
Outdoor receiver
11
2 Buttons
4 Buttons
4 Buttons
4 Buttons
2 Channels
2 Channels
2 Channels
4 Channels