Nilfisk SC6500 1100D Instrucciones De Uso página 12

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

INSTALL THE BRUSHES (CYLINDRICAL SYSTEM)
CAUTION!
Turn the key switch off (O) and remove the key, before changing the brushes, and before opening any access panels.
1
Make sure the Scrub Deck is in the RAISED position. Make sure the Key Switch (A) is off (O).
2
See Figure 3. Remove both side skirt assemblies. NOTE: The skirts are held in place by two large Knobs (AA). Loosen these knobs, slide the Skirt
Assemblies (BB) forward slightly and then off of the Scrub Deck.
3
Loosen the Black Knobs (CC) on top of the Idler Assemblies (DD) until they drop down far enough to disengage from the Notches (EE) and remove.
4
Slide the brush into the housing, lift slightly, push and turn until it seats. Re-install the Idler Assemblies (DD) and Skirt Assemblies (BB).
3
FIGURE
12/2014
AA
DD
INSTRUCTIONS FOR USE
CC
BB
56091145 - SC6500
ENGLISH - A
EE
A - 11

Hide quick links:

Tabla de contenido
loading

Tabla de contenido