A
DESCRIPTION
IJ=HJI=JF=CA#
1
Upper handles
2
Lower handles
3
Fastening knobs for upper handles
4
Grass catcher
5
Oil filler cap
6
Oil drain plug
B
ASSEMBLY OF GRASS CATCHER (
C
ASSEMBLY REAR DEFLECTOR (
D
1
ASSEMBLY (
IJ=HJI=JF=CA#
D
2
ASSEMBLY (
IJ=HJI=JF=CA#!
D
3
ASSEMBLY (
IJ=HJI=JF=CA#"
D
4
ASSEMBLY (
IJ=HJI=JF=CA##
D
5
ASSEMBLY (
IJ=HJI=JF=CA#$
E
ADJUSTMENT OF CUTTING HEIGHT (
F
SAFETY PRECAUTIONS (
l Always operate with the deflector or grasscatcher in the correct position.
l Always stop the engine before removing the grasscatcher or adjusting the height of cut.
l Never place your hands or feet underneath the deck or into the rear grass discharge chute while the engine is running.
IJ=HJI=JF=CA#%
G
Before mowing, remove all foreign objects from the lawn which may be thrown by the machine. While mowing, stay alert for any foreign objects which may have been
missed.
Never lift the rear of the mower while starting the engine or during normal operation.
H
IJ=HJI=JF=CA#%
Never place your hands or feet underneath the deck or into the rear discharge chute while the engine is running.
OPERATION (
IJ=HJI=JF=CA#%
I
ENGINE ADJUSTMENTS
Refer to the engine manufacturer's maintenance manual.
CAUTION:- 0.6l Oil must be added to the engine before use.
IJ=HJI=JF=CA#%
J
STARTING THE ENGINE
Once the machine has been set up properly, start the engine as follows:
a) Engines with choke system:
when the engine is cold, position the accelerator lever (13) on START
b)Operate the engine stop lever (14) to prepare the engine for start, keep lever pressed against handle while starting and using the machine - it operates the engine brake.
c) Engines with primer system:
Press the fuel-enrichment pump (Picture 'I' item 36) located on the carburettor 3 or 4 times position the accelerator lever (13) on MAX.
For further information and explanations, read carefully the user instruction manual of the engine.
IJ=HJI=JF=CA#%
M
K
d) Start engine.
MANUAL STARTING: (While holding the engine stop lever (14)).
lHold the engine start-grip (11) and pull the starter rope gently until you feel the resistance caused by compression. Return the starter rope slowly then pull the handle
firmly towards you to its full extent.
IJ=HJI=JF=CA#%
L
ELECTRICAL STARTING : (While holding the engine stop lever (14)).
lInsert the plug (G) in the socket (H) on the engine. Turn the ignition key (17).
CAUTION: The blade starts turning as soon as the engine is started except on the BBC version.
)
7
8
9
10
11
12
13
IJ=HJI=JF=CA#
)
IJ=HJI=JF=CA#
)
)
)
)
)
IJ=HJI=JF=CA#%
)
IJ=HJI=JF=CA#%
)
Deck
Adjusting levers for cutting height
Spark plug
Fuel cap
Engine start-grip
Rear deflector
Throttle lever
)
Manual lawn mower
Remove the bail arms, attach cables as shown and re-fit the bail arms, if
applicble.
Assemble the handle fit the levers with the pins and clips provided, assemble
the wheels as shown and throttle if supplied.
Self-Propelled/ Electric Start Lawnmower.
Remove the bail arms, attach cables as shown and re-fit the bail arms.
3 Speed Self-Propelled/Electric Start Lawnmower.
Remove the bail arms, attach cables as shown and re-fit the bail arms.
Self-propelled Lawnmower with Blade Brake.
Remove the bail arms, attach cables as shown and re-fit bail arms.
3 Speed Self-Propelled Lawnmower with Blade Brake.
Remove the bail arms, attach cables as shown and re-fit the bail arms.
)
9
14
Engine stop lever
15
Reduction gear
16
Console
17
Ignition key
18
Clutch lever
19
Blade engagement lever
20
Handle advance speed
ENGLAND
