Product Description And Specifications - Bosch GDR 14,4-LI Professional Manual Original

OBJ_BUCH-1536-004.book Page 11 Tuesday, September 6, 2016 11:34 AM
Service
 Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Screwdrivers
 Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may con-
tact hidden wiring. Fasteners contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 Use only original Bosch batteries with the voltage list-
ed on the nameplate of your power tool. When using oth-
er batteries, e.g. imitations, reconditioned batteries or
other brands, there is danger of injury as well as property
damage through exploding batteries.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Technical Data
Cordless Impact Screwdriver
Article number
Rated voltage
No-load speed
Impact rate
Maximum torque, hard screwdriving application
according to ISO 5393
Bolt size
Max. screw dia.
Tool holder
Weight according to EPTA-Procedure 01:2014
*dependent of the battery pack being used
Bosch Power Tools

Product Description and Specifications

Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Screwdriver bit with ball catch*
2 Tool holder
3 Locking sleeve
4 "PowerLight"
5 Carrying strap
6 Belt clip*
7 Battery pack*
8 Battery unlocking button*
9 Rotational direction switch
10 On/Off switch
11 Handle (insulated gripping surface)
12 Universal bit holder*
13 Screwdriver bit*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GDR 14,4-LI
3 601 JA9 0..
V= 14.4
-1
min 0 –2600
-1
min 0 –3000
Nm 120*
mm M4 – M12
mm 8
¼" hexagon socket
kg 1.3 –1.5*
English | 11
GDR 18-LI
3 601 JA9 1..
18
0 –2600
0 –3000
130*
M4 – M12
8
¼" hexagon socket
1.3 –1.8*
1 609 92A 2CW | (6.9.16)