Product Description And Specifications; Intended Use; Product Features; Noise/Vibration Information - Bosch GBM 10-2 RE Professional Manual Original

OBJ_BUCH-321-004.book Page 13 Monday, May 5, 2014 9:30 AM
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Intended Use

The machine is intended for drilling in wood, metal, ceramic
and plastic. Machines with electronic control and right and
left rotation are also suitable for screwdriving and tapping.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck*
2 Front sleeve
3 Rear sleeve
4 Lock-on button for On/Off switch
5 Thumbwheel for speed preselection
(GBM 10-2 RE/GBM 13-2 RE)
6 On/Off switch
7 Rotational direction switch
(GBM 10-2 RE/GBM 13-2 RE)
8 Gear selector
9 Button for depth stop adjustment
Bosch Power Tools
10 Auxiliary handle (insulated gripping surface)
(GBM 13-2/GBM 13-2 RE)
11 Depth stop
12 Handle (insulated gripping surface)
13 Chuck key*
14 Key type drill chuck*
15 Screwdriver bit*
16 Universal bit holder*
17 Securing screw for für keyless chuck/key type drill chuck
18 Open-end spanner**
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
**Commercially available (not included in the delivery scope)

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-1.
Typically the A-weighted sound pressure level of the product
is 79 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
Drilling into metal: a =8.5 m/s , K=4.0 m/s
h
2
Screwdriving: a <2.5 m/s , K=1.5 m/s
h
2
Tapping: a <2.5 m/s , K =1.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
English | 13
2
,
2
,
2
.
2 609 932 946 | (5.5.14)