Royal Catering RCFW 120PRO Manual De Instrucciones página 14

• Before cleaning you must remove the electricity supply plug isolating
the appliance from the main power circuit.
6.2 Procedure to Follow for Cleaning the Appliance (see fig. 6)
• Remove the pestle and food tray;
• Unscrew the lock nut and remove the disk. The blade and the screw feeder can
be unscrewed (in the direction indicated by the arrow).
• Unscrew the knob and remove the mincer, always in the direction indicated by
the arrow.
Now all the components can be washed( see fig. 7 )using warm water ( 50°C) and
a neutral detergent. To clean the main structure use a damp cloth remember to fre-
quently rinse.
The disk mounted on the RCFW 120PRO/RCFW 220PRO/RCFW 220EXPERTShould
be brushed clean. Carefully clean the punched holes. Make sure all the components
are completely dry before remounting them.
NB: To remount the RCFW 120PRO/RCFW 220PRO/RCFW 220EXPERT-
follows the above diagrams:
1. Mount the mincer block and block it in position using the knob;
2. Insert the screw feeders into the mincer block make sure it is positioned cor-
rectly;
3. Mount the blade onto the square pin on the screw feeder and then mount the
disk maintaining the original coupling configuration;
4. Once all the components have been mounted secure by screwing the lock nut in
place. FIG 6-Removing components
Fig. 6
1. Knob nut 2. disk 3. blade 4. screw feeder 5. mincer block
26
Fig. 7
7 MAINTENANCE
7.1 Generalities
Before servicing the appliance you must disconnect the electricity supply plug isola-
ting the appliance from the main power source.
7.2 Foot Supports
In time the foot supports can deteriorate causing instability. If this is the case replaces
them.
7.3 Power Supply Cable
Periodically check wear in the power cable and if necessary contact the "SERVICE
CENTRE" for a replacement.
7.4 Push Button Label
In time the label on the could become marked or even damaged.
27