Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Consult the separate engine operator's manual for instructions on setting up the
engine.
Starting The Engine
Be sure no one other than the operator is standing near the yard vaccum
while starting engine or operating vacuum. Never run engine indoors
or in enclosed, poorly ventilated areas. Engine exhaust contains carbon
monoxide, an odorless and deadly gas. Keep hands, feet, hair and loose
clothing away from any moving parts on engine and yard vacuum.
IMPORTANT: The bag/chute switch button must be fully depressed by the tip of
front tab on bag handle or blower chute for engine to start. See Figure 10.
NOTE: Make sure bag/chute switch wire is connected to engine and grounded to
mounting bracket.
Top View
Bag/Chute
Switch Wire
Consult the separate engine operator's manual for instructions on operating the
engine.
To Empty Bag
1.
Unhook bag straps from the lower handle. See Figure 11.
2.
Unsnap bag clip from the top of lower handle. See Figure 11.
WARNING
Front Tab
Side View
Figure 10
OPERATION
3.
Grasp bag handle with one hand and pull lock rod on mounting bracket with
other hand toward engine to release. See Figure 11.
4.
Lift bag off back of unit. See Figure 11.
5.
Twist the two buttons on the back of the bag to unlock and empty contents.
See Figure 12. Hold bag handle and bag clip while emptying the contents.
6.
Compress bag opening and fold inner flap over opening.
7.
Fold outer flap over inner flap and insert buttons on the bag through metal
outlets.
8.
Twist the buttons to lock bag. Place bag back onto unit as instructed in the
ASSEMBLY section.
Outer Flap
11
2
3
1
Figure 11
Figure 12
4
Buttons
Inner
Flap
Tabla de contenido
Solución de problemas
