Tabla de contenido
Idiomas disponibles
Idiomas disponibles
H
SX INSTALLATION:
Steam nozzle
T
he control panel can also be installed inside the steam room. Steam nozzle / nozzles are fitted
approximately 20 to 40 cm from the floor underneath a bench or a seat, or onto the wall making
hot steam cannot burn your feet. The steam nozzles are directed towards the floor. When placing the
nozzles, also make sure that they will not be touched accidentally. The steam temperature is over 10
O
C and it can cause severe burns.
T
he thermostat is fitted to 170 cm above the floor level, preferably on the wall opposite the steam room
door. It is advisable to seal the thermostat mounting hole with a suitable substance to ensure that moistur
does not seep into the wall structure. NOTE: The thermostat cable is connected to the control panel.
Control panel
Flushing
Temperature sensor
Water connection
400V 3N~
sure the
0
e
9
Tabla de contenido
