Use With Filters + Sorbet Accessories - Imetec Succovivo Pro 2000 Instrucciones De Uso

WARNING!
• Insert the rubber lever that prevents the pulp from leaking into the opening in the
EN
lower part of the juice container [Fig. B] ensuring it is correctly engaged over the
pawl.
• insert the juicing container onto the motor casing ensuring the mark (▼)
matches that of the motor casing (▲) [Fig. C].
• Insert the selected filter (fine mesh filter, wide mesh filter or Beauty filter) into
the mixer [Fig. D].
• Note: should you choose to use the accessory for sorbets this operation
must not be performed.
• Note: if you want thicker juice use the wide mesh filter. With this filter, no
waste is produced, which is why the extracted juice is thicker.
• Insert the filter with mixer, or the accessory for sorbets into the juicing
container, aligning the red dot (•) on the filter with the red dot (•) on the upper
rim of the juicing container [Fig. E].
• Insert the auger into the filter by pressing and gently turning completely until
a click is heard [Fig. F]. Note: the cover cannot be fitted on if the auger is not
completely inserted in position.
• insert the hopper on the juicing container aligning the red dot (•) on the hopper
with the red dot (•)on the upper rim of the juicing container [Fig. G], then rotate
clockwise until compete closure [Fig. H].

USE WITH FILTERS + SORBET ACCESSORIES

WARNING!
DO NOT use this appliance if there are visible signs
of damage.
WARNING!
WARNING!
WARNING!
to the on/off switch.
WARNING!
when the motor is on.
WARNING! Use the presser only to press fruit or vegetables.
DO NOT use your fingers or any other tool.
22
DO NOT touch the moving parts.
DO NOT use the appliance empty.
DO NOT use the safety system as an alternative
DO NOT open the protective handle or the lid