Set-Up - Tribest Sedona Express SD-6780 Manual De Instrucciones

Function of switch and buttons:
1. POWER Switch turns the Tribest Sedona Express on and off.
2. MODE button will allow you to choose one of three settings. The lights to the right of the MODE
button indicate which mode is activated.
• When the top RED light is lit, only FAST mode is activated.
• When the bottom GREEN light is lit, only RAW mode is activated.
• When both the RED and GREEN light are lit, the COMBO mode is activated (both FAST and
RAW mode) which uses the Two-Stage Sequential Temperature-Timer (TST) to speed up the
dehydration process.
The three settings:
1. FAST mode: The average internal temperature levels (as high as 167°F) will be main-
tained at the indicated temperature set by the user. As the heating element cycles on
and off, internal temperature will slightly rise and fall. The indicated temperature is
the average temperature maintained by the Sedona Express.
2. RAW Mode (with Overheat Protection): Uses the Overheat Protection feature to
ensure that the internal temperature (as high as 118°F) will not exceed the indicated
temperature. Indicated temperature is not the average temperature; indicated
temperature is the maximum temperature that the machine will reach in the drying
chamber. This is useful for preserving certain vital nutrients that can degrade at high
temperatures.
3. COMBO mode (with TST): Uses the Two-Stage Sequential Temperature-Timer (TST) to
set the two temperature/time settings. It starts at a higher temperature for a set time
(FAST mode) then automatically drops down to the lower temperature for the set
amount of time.
• FAST mode: The first temperature setting and is set at a higher temperature
• RAW mode: The second temperature setting and is set at lower tempera-
3. SET/LIGHT button has three functions:
• It enables you to set the temperature:
- When initially setting the temperature, press the SET button once and the 3 digits of the TEMP
window will flash.
• It enables you to set the timer:
- When you press the SET button once more, the 2 digit TIMER window will flash.
1) Press the SET button once – While the TEMP window flashes, set the desired temperature by
using the 10 or 1 buttons to select your desired temperature.
2) When the TEMP window displays your desired temperature, press the SET button to
finalize your temperature setting. Your desired temperature is now set up, and the TIMER window
will flash.
to encourage faster initial dehydrating, less spoiling/ fermenting of foods.
tures for the majority of the duration to maintain the necessary temperature
for nutrient preservation.

seT-uP

EN
11