CMT ORANGE TOOLS Pocket-Pro Serie Manual De Instrucciones página 3

Assembling your Pocket-Pro
1) If you purchased the PPJ-001 Deluxe Set, attach the molded
Jig Base to the Phenolic Plate using four machine screws
(provided). If you have the PPJ-002 Set, attach the jig to a flat
piece of plywood or your workbench. See illustrations below for
suggested dimensions. Screws should be tight enough to keep
the jig from moving on the plate, but do not overtighten and
damage your jig.
2) Assemble the molded Upper Jig to the Jig Base using the
two screws and knobs provided.
3) Attach the Toggle Clamp to the Phenolic Base Plate (PPJ-
001 only) or to the base you constructed in Step One using
four screws. Thread the shaft of the Clamp Tip into the body of
the Toggle Clamp.
Fig. 3
Mounting Holes for
Molded Jig
www.cmtutensili.com
GETTING TO KNOW YOUR POCKET-PRO
Fig. 1
Fig. 2
M4 screws
Tip
14-3/4"
375mm
M4 screw
Base Plate
M8 screw
Mounting Holes for
Molded Jig
Knob
3