D - A Belt Tightening - OEM HENERGO HV/45 E-1 Manual De Uso Y Mantenimiento

6.1.c - Planned maintenance
6.1.c.a - Every 2 years
• Contact manufacturer's technical service to carry out
a comprehensive checking of the oven.
6.1.d - Maintenance in case of need
6.1.d.a - Belt tightening (Fig.3)
In case the belt tends to loosen it is necessary to tighten
it acting on the tighteners (1) positioned on outlet area
of the belt.
By turning tighteners clockwise, the belt is tightened,
vice versa the belt is loosened; it is important for the
tightening to be uniformly carried out by means of the
two tighteners.
EN - 24
Maintenance
FIG. 3
G45
1