Inversion Of Belt Rotation'sdirection; Installation Of Optional Supporting Surface - OEM HENERGO HV/45 E-1 Manual De Uso Y Mantenimiento

3.6 - INVERSION OF BELT ROTATION'S
DIRECTION (Fig.7-8)
DANGER
Before carrying out this operation, disconnect elec-
trical feeding in the upper part of the machine.
The direction of belt rotation is established in order to
have the product inlet on the left side of the oven and
its outlet on the oven's right side, but it is possible to
invert the direction of rotation as to reverse inlet and
outlet.
To reverse rotation's direction, as well as inlet and out-
let side, do the following:
• Remove the panel (1) unscrewing the relevant
screws.
• Disconnect the two (2) and (3) wires feeding the motor
(4) and invert the position.
• Remount the components and check for the belt's
correct functioning.
3.7 - INSTALLATION OF OPTIONAL
SUPPORTING SURFACE (Fig.9)
It is possible to install a supporting surface to ease loa-
ding and unloading operations.
• Unscrew the knobs (1) on the head of the belt (2).
• Position the supporting surface (3) and  x it by the
knobs (1).
• It is possible to adjust the height of the supporting
surface (3) loosening the knobs (1), once the wished
position is reached,  x the supporting surface (3) by
screwing the knobs (1).
3.8 - INSTALLATION OF AN OPTIONAL
ROLLER UNIT (Fig.10)
It is possible to install both in inlet and outlet an optio-
nal roller unit in order to ease loading and unloading
operations.
• Unscrew the knobs (1) on the head of the belt (2).
• Position the roller unit (3) and  x it by the knobs (1).
• It is possible to adjust the height of the roller unit (4)
loosening the knobs (5), once the wished position is reached,  x the roller unit (4) by screwing the knobs
(5).
EN - 14
Installation and connections
FIG. 7
Standard rotation's direction
Inverted rotation's direction
FIG. 8
FIG. 9
2
3
FIG. 10
2
3
5
G45
4
2
3
1
1
1
5
4