In installations with more than four mini LED spotlights, which must be controlled jointly, a single pushbutton should be
installed connected in parallel to the connection terminals.
6.1.2. Function modes
The pushbutton control enables you to create different lighting scenarios inside the pool with two function modes:
Fixed colour: Selection of a fixed colour from seven possibilities.
COLOUR Nº
Automatic colour sequence: Selection from among seven programmes of colour sequences. Each programme is defined by
the duration of each colour and of the transition from one colour to another, according to the following table:
SEQUENCE
1
Red
2
Red
3
Purple
4
Red
5
Purple
6
Yellow
7
Green
Each press of the pushbutton changes a colour or sequence. The cycle of colours and sequences is rotary. For example, if
you are in colour 5, by pressing once you will go to colour 6. If you press once again, you will go to sequence 1. If you are in
sequence 7, press once and you will go to colour 2 which is Red.
Colour 1 is white and is reached by one long press.
6.2. Control by means of the Colorplus Series
The Mini LED spotlight can be used together with spotlights of the 27 LED Colorplus series, whatever its configuration may
be (TOP-ECO).
6.2.1. Colorplus ECO: pushbutton control
The same functions as the feeder control. For further information see section 6.1.2.
6.2.2. Colorplus TOP: control by means of Receiver-Modulator
The Remote Control – Receiver-Modulator – Transformer – Led Projector unit enables you to create different lighting
scenarios inside the pool with two function modes:
% RED
1
100
2
100
3
0
4
0
5
100
6
0
7
100
ORDER OF COLOURS
Blue
Green
Purple
Green
Cyan
Blue
Cyan
Yellow
Blue
Green
Cyan
Yellow
Purple
Cyan
Red
Blue
% BLUE
% GREEN
100
100
0
0
100
0
0
100
100
0
100
100
0
100
Cyan
Yellow
Purple
Yellow
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-5-
COLOUR
White
Red
Blue
Green
Purple
Cyan
Yellow
COLOUR TIMING
BLENDING TIMING
(SEG.)
2
4
4
8
16
0.5
0,5
(SEG.)
2
4
4
8
16
0,5
0,5