Charging The Battery Pack (Optional Battery Charger) - Kenwood WD-K10PBS Guia Del Usuario

CHARGING THE BATTERY PACK (OPTIONAL BATTERY
CHARGER)
Be sure to charge this unit using the charger KSC-48CR before
using.
Charging the battery
o
1 Remove the bracket underneath the charger and insert the
DC plug of the AC adapter into the DC IN jack of the charger.
For details on installing and removing the bracket, refer to the
instruction manual of the charger KSC-48CR.
2 Insert the cable into the left or right groove depending on
where the charger is set up.
* In this illustration, the cable is inserted in the left groove.
3 Reinstall the bracket and insert the AC adapter into the AC
outlet.
4 Place the transceiver with the battery pack installed onto the
charger.
Transceiver (WD-K10PBS/WD-K10TR)
Charger (KSC-48CR) (sold separately)
Groove
Pull the cable of the
DC plug around as
shown in the
illustration.
13