Tritec TRI-KA Instrucciones De Manejo página 215

TRI-KA – Functions_215
Window 2/7 – PV data 2
Selection or entry of module data of the photovoltaic system to
be measured.
If a module cannot be found in the module database, the charac-
teristic curve can be measured using the Dummy module [TRITEC].
The missing module can later be added to the module database.
Modules added later are saved under [Custom] in the PC software.
Manufacturer/Type: Selection of the PV module to be measured
from the module database.
Number of modules serial: Number of PV modules connected in
series of the system to be measured.
Number of strings parallel: Number of strings connected in paral-
lel of the system to be measured.
To move to the next window after the customer and system data
have been entered, click on the right arrow at the bottom of the
screen.
Window 3 / 7 – Correction voltage loss cables
Correction of the measuring result with the voltage loss in the PV
cable between the modules and the measuring instrument.
The correction is activated and deactivated in the first line. Data
to calculate the cable voltage loss are entered in the following
fields.