Stihl GS 461 Manual De Instrucciones página 16

Ocultar thumbs Ver también para GS 461:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

English
warranty claim for a component that has
not been serviced or maintained
properly or if nonapproved replacement
parts were used, STIHL may deny
warranty coverage.
Never operate a concrete cutter that is
damaged, improperly adjusted or not
completely or securely assembled.
Follow the maintenance and repair
instructions in the appropriate sections
of your instruction manual.
WARNING
Use only STIHL replacement parts for
maintenance and repair. Use of parts
manufactured by others may cause
serious or fatal injury.
WARNING
Always stop the engine and make sure
that the cutting tool is stopped before
doing any maintenance or repair work or
cleaning the power tool.
WARNING
Do not attempt any maintenance or
repair work not described in your
instruction manual. Have such work
performed only at your STIHL servicing
dealer.
Clean off grinding dust after finishing
work. Tighten all nuts, bolts and screws
except the carburetor adjustment
screws after each use.
Do not clean your machine with a
pressure washer. The solid jet of water
may damage parts of the machine.
14
WARNING
Never test the ignition system with spark
plug boot removed from spark plug or
with an unseated spark plug, since
uncontained sparking may cause a fire.
WARNING
To reduce the risk of fire and burn injury,
use only spark plugs authorized by
STIHL. Always press spark plug boot
snugly onto spark plug terminal of the
proper size. (Note: If terminal has a
detachable SAE adapter nut, it must be
attached.) A loose connection between
spark plug terminal and ignition wire
connector in the boot may create arcing
that could ignite combustible fumes and
cause a fire. Keep spark plug clean, and
make sure ignition lead is in good
condition.
WARNING
Do not operate your power tool if the
muffler is damaged, missing or modified.
An improperly maintained muffler will
increase the risk of fire and hearing loss.
Never touch a hot muffler or spill fuel or
other flammable liquid over it. Burn
injuries or fire will result. If your muffler
was equipped with a spark-arresting
screen to reduce the risk of fire (e. g. in
the USA, Canada and Australia), never
operate your power tool if the screen is
missing or damaged.
In California, it is a violation of § 4442 or
§ 4443 of the Public Resources Code to
use or operate gasoline-powered tools
on forest-covered, brush-covered or
grass-covered land unless the engine's
exhaust system is equipped with a
complying spark arrester that is
maintained in effective working order.
The owner/operator of this product is
responsible for properly maintaining the
spark arrester. Other states or
governmental entities/agencies, such as
the U.S. Forest Service, may have
similar requirements. Contact your local
fire agency or forest service for the laws
or regulations relating to fire protection
requirements.
For any maintenance please refer to the
maintenance chart and to the warranty
statement near the end of the instruction
manual.
Keep the chain, bar and sprocket clean;
replace worn sprockets or chains. Keep
the chain at proper tension.
Store concrete cutter in a high or locked
place, away from children.
Empty the fuel tank before storing for
longer than a few days. Store fuel only in
correctly labeled and approved
containers. Avoid direct skin contact and
do not inhale the gas vapors.
GS 461

Capítulos

Tabla de contenido
loading

Tabla de contenido