Stihl HSA 65 Manual De Instrucciones página 16

English
During Charging Process
The light emitting diodes light up or flash
continuously to indicate the progress of
charge.
During charging the capacity that is
currently being charged is indicated by a
green flashing light emitting diode.
0 - 20 %
20 - 40 %
40 - 60 %
60 - 80 %
80 - 100 %
When the charging process is
completed, the light emitting diodes on
the battery go off automatically.
If the light emitting diodes on the battery
flash or light up red – see "If the red light
emitting diodes light up/flash
continuously".
14
During Operation
The green light emitting diodes light up
or flash continuously to indicate the state
of charge.
80 - 100 %
60 - 80 %
40 - 60 %
20 - 40 %
0 - 20 %
If the light emitting diodes on the battery
flash or light up red – see "If the red light
emitting diodes light up/flash
continuously".
If the red light emitting diodes light
up / flash continuously
1 light emitting diode Battery is too
1) 2)
lights up red: hot
4 light emitting diodes Battery faulty
flash red:
3 light emitting diodes Power tool is too
light up red: hot – allow it to
cool down.
3 light emitting diodes Power tool
flash red: faulty – have
checked by
servicing
dealer
1)
During charging process: Charging
process starts automatically after
the battery has cooled down /
warmed up.
1)
/cold
3)
4)
HSA 65