Pitch Shifter - IMG STAGELINE MFX-16M Manual De Instrucciones

LED of button BYPASS / F2 flashing
LED of button TAP/ F1
not lighting up
lighting up
Note: It will also be possible to activate / deactivate the
effect with the button BYPASS / F2 while its LED keeps
flashing. For this purpose, simply press the button briefly.
To return to the selection of the first two parame-
ters, keep the button BYPASS / F2 pressed again
until its LED stops flashing.
Chorus/ Del: The effects Chorus and Delay are
activated at the same time. The frequency of the
Chorus vibrato is adjustable with the control FX
VARIATION ( Chorus).

6.6 Pitch Shifter

The pitch of the input signal is shifted. The shifting
is adjustable in steps with the control FX VARIA-
TION (5):
0 = pitch decreased by 1 octave approx.
5 = no shifting
10 = pitch increased by 1 octave approx.
To hear only the signal with the pitch shifted, set the
control MIX (3) to EFFECT, e. g. to distort a voice
substantially.
All rights reserved by MONACOR
may be reproduced in any form or by any means for any commercial use.
adjustable parameter
ratio between echo effect
and reverb effect
reverb decay time
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual
7 Specifications
Frequency range: . . . . . 20 – 20 000 Hz ±0.5 dB
Mono input
Input voltage: . . . . . . 2.2 V max.
Connection: . . . . . . . 6.3 mm jack, unbal.
Stereo output
Output voltage: . . . . . 2.2 V max.
Connections: . . . . . . 6.3 mm jack, unbal.
S / N ratio: . . . . . . . . . . . > 90 dB
THD: . . . . . . . . . . . . . . . < 0.01 %
A/D and D/A converter
Quantization: . . . . . . 20 bits
Effect processor
Quantization: . . . . . . 24 bits
Power supply: . . . . . . . . 9 V~
Ambient temperature: . . 0 – 40 °C
Dimensions: . . . . . . . . . 140 × 45 × 125 mm
Weight: . . . . . . . . . . . . . 650 g
Subject to technical modification.
via power supply unit
provided and connected
to 230 V~ / 50 Hz
GB
11