Installation; Unpacking; Locating - Adam Equipment ABK Serie Manual De Usuario

EN

3.0 INSTALLATION

3.1

UNPACKING

The ABK/AFK scales have already been adjusted to work with a platform and
have been configured for this application. The platform and indicator have
been calibrated as a pair and must be used together.
3.2

LOCATING

© Adam Equipment Company 2015
•
The scales should not be placed in a location that
will reduce the accuracy.
•
Avoid extremes of temperature. Do not place in
direct sunlight or near air conditioning vents.
•
Avoid unsuitable tables. The table or floor must be
rigid and not vibrate.
•
Do not place near vibrating machinery.
•
Avoid unstable power sources. Do not use near
large users of electricity such as welding equipment
or large motors.
•
Avoid operating in areas of high static or weighing
items which generate a lot of static such as plastics
or powders. This will affect measurements and may
damage electronics. Use
bonding straps to reduce potential.
•
Avoid high humidity that might cause condensation.
Avoid direct contact with water. Do not spray or
immerse the scales in water.
•
Avoid air movement such as from fans or opening
doors. Do not place near open windows or air-
conditioning vents.
•
Keep the scales clean. Do not stack material on the
scales when they are not in use.
5
grounding mats or
3116611621RevA1-Feb15