Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Camera
1
2
3
1. 12 IR Leds
2. Lens
3. Antenna
4. Power supply connector
5. Mounting bracket
5
4
Kit setup
1. Connect the monitor's power supply cable to the cigarette lighter
2. Power supply the camera (with its own cable)
3. Now it's possible to view and record the images
Optional camera setup
If you want to install optional cameras, at first they have to be paired with the
monitor, follow these steps:
1. Select a free channel (no camera paired)
2. Enter the menu
3. Select the PAIRING option
4. Turn on the camera before the timer expires
You can also pair the new camera on an already assigned channel, but in this
case the previous pairing will automatically be deleted.
Auto channel switch
(if you have more cameras installed)
The monitor cable has 4 coloured "TRIG" wires (Green 1 - White 2 - Yellow
3 - Blue 4), and each one corresponds to one of the four channels.
Connecting the corresponding TRIG wire to the positive pole (+) the monitor
will automatically switch to that channel. When the wire is disconnected, the
monitor will return to the previous channel.
From SYSTEM DELAY TIME you can set the time to wait before returning
to the previous channel when the TRIG cable is disconnected.
Example of typical 2 channel setup:
1. Front camera always on and recording everything that happens on the
road (set on channel 1)
14
Tabla de contenido
Solución de problemas
