Stihl RE 362 Manual De Instrucciones página 50

English
Reduced working pressure and water
flow rate
The setting lever can be used to adjust
the working pressure and water flow rate
in fine increments.
Pressure control at the nozzle
The operating pressure can be infinitely
adjusted at the nozzle.
Turn the nozzle sleeve – the
N
quantity of water delivered remains
unchanged
High-pressure hose
NOTICE
Do not buckle or loop the high-pressure
hose.
48
Do not place any heavy objects on the
high-pressure hose, and do not drive
any vehicles over it.
Machines with hose reel
The high-pressure hose can be
disconnected either from the front or
back of the machine with the folding
cliplock.
1
Undo the hose reel brake (1)
N
Fold the cliplock forward or N
backward
Standby mode
NOTICE
The machine must not be operated in
standby mode for more than 5 minutes.
If work is interrupted for more than
5 min., during breaks or if the machine is
left unattended, switch off the machine
at the master switch – see "Switching off
the machine".
Only RE 462, RE 462 PLUS
Safety shutdown
If the switched on machine is not
operated, it disconnects from the power
mains automatically after 30 minutes.
Protection against inadvertent operation
of the spray gun (e. g., by uninvolved
persons).
To restart the machine, switch it off and
then on again.
Motor coasting function
The pump continues to run without
pressure in bypass mode for
approx. 20 seconds after closing the
spray gun before the motor switches off.
This prevents the automatic cutoff
device from unnecessarily actuating.
RE 362, RE 362 PLUS, RE 462, RE 462 PLUS