Fitting, Removing High-Pressure Hose - Stihl RE 362 Manual De Instrucciones

English
Fitting, removing high-
pressure hose
Machines without hose reel
Connecting the high-pressure hose
1
2
Push high-pressure hose onto the
N
connector (1)
Attach union nut (2) and screw it on
N
and tighten by hand
Disconnecting the high-pressure hose
Unscrew the union nut (2)
N
Pull high-pressure hose off of
N
connector (1)
Machines with hose reel
The high-pressure hose is already
connected at the factory.
44
Disconnecting the high-pressure hose
3
1
Unroll the high-pressure hose (1)
N
Open the hose guide (2)
N
Unscrew the union nut (3).
N
Pull high-pressure hose (1) off of
N
connector
Connecting the high-pressure hose
Push the high-pressure hose (1)
N
onto the connector of the hose reel
Attach union nut (3) and screw it on
N
and tighten by hand
Push the high-pressure hose into
N
the hose guide (2) and close the
hose guide.
Roll up high-pressure hose
N
High-pressure hose and spray gun
Fitting
2
Push the high-pressure hose (1)
N
onto the connector (2)
Attach union nut (3) and screw it on
N
and tighten by hand
Removing
Push the coupling (4) in the
N
direction of the arrow and hold it
Loosen the union nut (3) and
N
unscrew it from the connector in the
direction of the arrow
High-pressure hose extension
As a rule, always use only one high-
pressure hose extension – see "Special
accessories"
RE 362, RE 362 PLUS, RE 462, RE 462 PLUS
3
1
4
3